Home | Products | Contacts

RP Manufacturing and Calibration is the exclusive designer and manufacturer of the "Twister" product line. From Break-out Units to Casing Elevators, we cover the entire range of tubing and casing from 1 5/16" to 22" diameters.

RPMG's mission is to make the most efficiently engineered torque equipment, competitively priced, and operable by anyone. RPMFG offer parts and service nation wide for all make and models, and have International Agents in Russia, China, and Brazil. R&W is one of these Agents and can provide an extension of USA -only-services to other places where you are. Just call us.

Twister 3000 Ratchet Type Machine
Basic unit comes with a 12 ft. standard bed, power traverse tailstock, hydraulic power unit and control console with auxiliary valves and controls for optional equipment. Additional features include connection plates that are drilled and tapped to accept head and tailstock beam extensions, along with a weldment to attach a spinner assembly or push and pull assembly on either end.

Headstock is equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece. The fixed headstock can handle material from 3 1/2" to 16" diameters, and is equipped with two sets of jaw holders. One set for larger diameters of pipe or tubing and a set of reducing jaw holders for smaller diameters.

Tailstock is also equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece while traversing. The clamp cylinders are also equipped with one set of standers jaw holders and one set of reducing jaw holders that accommodate 3 1/2" to 18" diameters.

Chucking Capacity:
3 1/2" to 18" dia.

Torque Capacity:
MK160,000 ft/lb BK190,000 ft/lb

Size
:
12'x48"x60" w/o options

Weight
:
8,500 lbs. w/o options

Twister 4000 Ratchet Type Machine
Basic unit comes with a 12 ft. standard bed, power traverse tailstock, hydraulic power unit and control console with auxiliary valves and controls for optional equipment. Additional features include connection plates that are drilled and tapped to accept head and tailstock beam extensions, along with a weldment to attach a spinner assembly or push and pull assembly on either end.

Headstock is equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece. The fixed headstock can handle material from 2 1/2" to 8" diameters, and is equipped with two sets of jaw holders. One set for larger diameters of pipe or tubing and a set of reducing jaw holders for smaller diameters.

Tailstock is also equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece while traversing. The clamp cylinders are also equipped with one set of standers jaw holders and one set of reducing jaw holders that accommodate 2 1/2" to 8" diameters.
Chucking Capacity: 2 1/2" to 9" dia.

Torque Capacity: MK 50,000 ft/lbs BK 70,000 ft/lbs

Size:
12'x48"x60" w/o options

Weight:
7,350 lbs. w/o options
 
Twister 6000 Continuously Rotating Machine
Basic unit comes with a 12 ft. standard bed, power traverse tailstock, hydraulic power unit and control console with auxiliary valves and controls for optional equipment. Additional features include connection plates that are drilled and tapped to accept head and tailstock beam extensions, along with a weldment to attach a spinner assembly or push and pull assembly on either end.

Headstock is equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece. The fixed headstock can handle material from 2 1/2" to 12 3/4" diameters, and is equipped with two sets of jaw holders. One set for larger diameters of pipe or tubing and a set of reducing jaw holders for smaller diameters.

Tailstock is also equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece while traversing. The clamp cylinders are also equipped with one set of standers jaw holders and one set of reducing jaw holders that accommodate 2 1/2" to 12 3/4" diameters.
Chucking Capacity: 2 1/2" to 15"

Torque Capacity: MK 50,000 ft/lbs
BK 50,000ft/lbs

Size:
12'x48"x60" w/o options

Weight:
6,350 lbs. w/o options

 
Twister 6500 Continuously Rotating Machine
Basic unit comes with a 12 ft. standard bed, power traverse tailstock, hydraulic power unit and control console with auxiliary valves and controls for optional equipment. Additional features include connection plates that are drilled and tapped to accept head and tailstock beam extensions, along with a weldment to attach a spinner assembly or push and pull assembly on either end.

Headstock is inverted and equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece. The fixed headstock can handle material from 2 1/2" to 12 3/4" diameters, and is equipped with two sets of jaw holders. One set for larger diameters of pipe or tubing and a set of reducing jaw holders for smaller diameters.

Tailstock is also equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece while traversing. The clamp cylinders are also equipped with one set of standers jaw holders and one set of reducing jaw holders that accommodate 2 1/2" to 12 3/4" diameters.
Chucking Capacity: 2 1/2" to 15" dia.

Torque Capacity: MK 70,000 ft/lbs BK 70,000 ft/lbs

Size:
12'x48"x60" w/o options

Weight:
6,350 lbs. w/o options

 
Twister 7000 Continuously Rotating Machine
Basic unit comes with a 12 ft. standard bed, power traverse tailstock, hydraulic power unit and control console with auxiliary valves and controls for optional equipment. Additional features include connection plates that are drilled and tapped to accept head and tailstock beam extensions, along with a weldment to attach a spinner assembly or push and pull assembly on either end.

Headstock is equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece. The fixed headstock can handle material from 7" to 22" diameters, and is equipped with two sets of jaw holders. One set for larger diameters of pipe or tubing and a set of reducing jaw holders for smaller diameters.

Tailstock is also equipped with self-centering hydraulic clamp cylinders that extend evenly to secure the work piece while traversing. The clamp cylinders are also equipped with one set of standers jaw holders and one set of reducing jaw holders that accommodate 7" to 22" diameters.
Chucking Capacity: 7" to 22" dia.

Torque Capacity: MK 105,000 ft/lbs
BK 105,000 ft/lbs

Size:
12'x58"x80" (standard)

Weight:
14,350 lbs.(standard)